






KW Coilover Kit V1 for BMW (E24) M635CSi - Front Struts in Exchange
Please note: Not all items are kept in stock. Lead times may apply contact us to confirm availability before ordering.

KW's V1 is the entry model in its street coilover range, pairing height-adjustable struts with a damper setup that KW pre-configures for each vehicle. Ride height is continuously adjustable within the tested range using a dirt-resistant trapezoidal thread and composite collar, so it can still be changed easily years after fitting. Corrosion-resistant springs and bump stops are built for a long service life. This kit is developed for the BMW M635CSi (E24).
Key Features
- Vehicle-specific, factory-set damping
- Continuous ride height adjustment within the tested range
- Trapezoidal thread with composite adjuster collar
Specifications
- Version: V1 classic line
- Damping: Fixed, vehicle-specific setting
- Material: Galvanised steel
- Front lowering: 45–60 mm
- Rear lowering: 40–60 mm
- Front axle load: up to 980 kg
- Rear axle load: up to 1,000 kg
- Supplied as: Front axle + rear axle coilover struts (Original front axle strut housings modified)
Front axle load up to 980 kg; Rear axle load up to 1,000 kg.
Raab coilover made by KW.
See the Disclaimer tab for reference notes.
| Year | Make | Model | Variant | Engine | Drive | Notes | Refs |
|---|---|---|---|---|---|---|---|
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 635 CSi | Petrol · 162 kW · 3.4L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 635 CSi | Petrol · 160 kW · 3.4L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 628 CSi | Petrol · 135 kW · 2.8L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | M 635 CSi | Petrol · 210 kW · 3.5L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 635 CSi | Petrol · 155 kW · 3.4L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 633 CSi | Petrol · 145 kW · 3.2L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 635 CSi | Petrol · 136 kW · 3.4L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 633 CSi | Petrol · 135 kW · 3.2L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | 635 CSi | Petrol · 141 kW · 3.4L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
| 1975–1989 | BMW | 6 (E24) BMW 6 CS, BMW 6 CS/1 | M 635 CSi | Petrol · 191 kW · 3.5L · 6-cyl | Rear-Wheel Drive | Facelift models (from 05/1982) | 1, 6, 8, 40, 41, 62, 82, 420 |
- Note 1: Height adjustable on the front and rear axles (threaded strut housings).
- Note 6: When using original tyres, wheel offset spacers may be required.
- Note 8: Not for vehicles with automatic self levelling control / air suspension.
- Note 40: Original struts need to be sent in advance for modification.
- Note 41: Coilover kits where the strut housings are being modified are only available in galvanised finish.
- Note 62: Not for cars with electronic damping.
- Note 82: Production on demand. Please ask for delivery time.
- Note 420: All vehicles manufactured after 05/82 require rear axle dome bearings: (BMW Part No.: dome bearing 33 52 1 126 987 + spring pad 33 52 1 117 671 + sealing washer 33 52 1 118 480 + washer 33 52 1 125 651 + plate 33 52 6 762 325).


