







Eventuri Carbon 2.0 TSI Intake for VW Golf GTI (MK8) / Cupra Leon VZ1 (MK4) / Formentor VZ1
Please note: Not all items are kept in stock. Lead times may apply contact us to confirm availability before ordering.

Eventuri Carbon 2.0 TSI Intake for VW Golf GTI (MK8) / Cupra Leon VZ1 (MK4) / Formentor VZ1
Sale price$3,079.00
Regular price (/)
The Eventuri Carbon Intake for the VW Golf GTI (MK8), Cupra Leon and Formentor with the 2.0 TSI is a complete redesign of the stock intake all the way to the turbo inlet. Taking cues from the Eventuri RS3 intake, it maximises the available space to suit all power levels from stock to high power builds with hybrid or full frame turbos, offering the highest possible flow rate with the lowest intake temperatures.
Key Features
- The restrictive stock inlet tube is replaced by a larger tube, and the patented Venturi housing provides the maximum internal volume the Golf engine bay allows, with laminar flow to the turbo tube
- The duct seals the filter opening to the front slam panel but is not limited to the stock entry feed: the front of the duct is lifted to add an opening behind the bonnet, equivalent to an extra hole of over 7" diameter, which completely de-restricts the stock cold air feed
- The sealed design keeps intake temperatures at a minimum and can significantly outflow the stock airbox. The bespoke filter flows up to 900 CFM at 28" H2O when flow tested on a Superflow SF-1020 with a housing using a 4" opening
- The housing comprises the bespoke high-flow filter, aluminium cowl, laser cut bracket and the carbon pod
- The sealed system keeps intake air temperatures low in an engine bay that heat soaks quickly, where an open cone filter would raise them. The Venturi housing gives a smooth transition from the filter to intake tubes with matched internal diameters, and the pure pre-preg carbon fibre insulates against heat and has smooth internal surfaces, unlike fibreglass with its sharp resin lines
- Bespoke dry cone filter with signature flow cones supports the Venturi housing principle and its medium is ISO tested for filtration in line with OEM standards
- The silicone turbo hose replaces the stock flexible tube to the turbo inlet, keeping its diameter as far as possible before tapering down to the stock turbo inlet. The GTI uses a different silicone hose without the secondary breather inlet
- The carbon duct has a flexible rubber edging that presses against the filter housing to seal against engine bay heat while letting the housing move with the engine
- Flow bench testing recorded 435 CFM for the stock GTI intake and 618 CFM for the Eventuri GTI intake, an increase in maximum flow of an additional 42%
Specifications
- Fitment: MK8 Golf GTI (this part number; the Golf R has its own), other 2.0 TFSI Gen 4 platforms
- Inlet tube diameter: 94 mm, replacing the stock 73 mm tube (over 60% more cross-sectional area)
- Filter outer diameter: 192 mm (7.6")
- Filtration surface area: Over 110,000 mm^2
- Material: 100% pre-preg carbon fibre, no fibreglass
- Set contents: Carbon fibre patented Venturi filter housing with 94 mm outlet, bespoke high-flow dry cone filter, carbon fibre inlet duct (full width), silicone tube with 94 mm inlet diameter, machined breather adapter (Golf R only), secondary breather filter and bracket (USA spec Golf GTI), laser cut stainless steel brackets
Note The Golf GTI Clubsport requires the Golf R intake, not this GTI version.
Vehicle compatibility
- VW Golf MK8 GTi, excluding Clubsport.
- Other 2.0 TFSi Gen 4 platforms.
Golf R and Clubsport require the Golf R intake.

