


ST Wheel Spacer System D2 20mm per Axle 4x100 - 54.1 Bore
Please note: Not all items are kept in stock. Lead times may apply contact us to confirm availability before ordering.

ST Wheel Spacer System D2 20mm per Axle 4x100 - 54.1 Bore
Sale price$322.05
Regular price$339.00 (/)
ST's D2 is a bolt-through wheel spacer with double centring: the spacer centres on the hub, and an additional centring collar on the spacer locates the wheel. Longer wheel bolts are required.
Key Features
- Double centring
- Black anodised for corrosion protection
- Wider track for a more planted stance
Specifications
- Width: 20 mm per axle (10 mm per wheel)
- Bolt pattern (PCD): 4x100, 5x100
- Centre bore: 54.1 mm
- Mounting: Bolt-through (longer wheel fasteners pass through the spacer)
- Centring collar: Yes
- Vehicle wheel fastening: Wheel bolts, M12x1.5
- Position: Front or rear axle
- Material: Aluminium
- Supplied as: Set (2 pcs)
Wheel mounting
| Bolt pattern | 4x100 |
|---|---|
| Hub bore | 54.1mm |
| Width per axle | 20mm |
| System | D2 |
| Thread | Bolt: M12x1.5 |
| Wheel offset limit | 30 |
| Material | Aluminium |
| Supplied as | set (2 pcs) |
- Note 320: ST shaft nuts with a 60° taper seat must be used to mount the wheel. The mounting holes of the wheel must have 60° taper seat, too. Additionally please check before assembly if the shaft of the ST shaft nut fits through the mounting holes of the wheel. ST shaft nuts can only be used in combination with system DZX. ST shaft nuts must be ordered separately. ATTENTION! Pleases consider minimum thread engagement. M12x1.25 at least 12.0 turns (15mm supporting thread) M12x1.50 at least 10.0 turns (15mm supporting thread) M14x1.50 at least 12.5 turns (19mm supporting thread) 1/2“ at least 12.0 turns (16mm supporting thread).

