ST shaft nuts allowing an easy use of all DZX spacers on vehicles with wheel studs. Thanks to the extended shaft of the nut the shaft nut reaches through the mounting holes of the rim. So the shaft nut can be screwed with enough turns on the original wheel studs of the vehicle. A complicated conversion to longer wheel studs is not necessary anymore.

The ST shaft nuts may only be mounted in combination with DZX wheel spacers. In addition the type of the shaft nut has to be checked.

Important note! Minimum thread engagement must be considered:

M12x 1,25 at least 12,0 turns
M12x 1,50 at least 10,0 turns
M12x 1,75 at least 10,0 turns
M14x 1,25 at least 13,0 turns
M14x 1,50 at least 11,0 turns
1/2" at least 12,0 turns